Do you generate labels?

Barcode or text labels per part carrying room, cabinet, orientation and edge treatment, formatted for your printer and produced in nest order.

How much yield improvement can we expect?

It depends on the mix, but optimising across board sizes and grain constraints typically lifts utilisation by several percent, the yield report makes it measurable.

Can you work to our existing cabinet library?

Yes. We programme against your construction method, hardware and edge-banding standard, so nothing arrives at the bench built differently from usual.

Do you handle solid timber as well as sheet goods?

Curved rails, mouldings and shaped components are programmed with pass direction and depth of cut set to protect grain and leave a finish-ready edge.

What stops small parts lifting off the bed?

Onion-skinning, tabs and cut sequence are set so small components stay held until the final pass, with pod and clamp positions simulated beforehand.

INDEX / SVC.04 CNC / SVC.04.D · CNC WOOD ROUTING SUPPORT

Nested, labelled and ready for the bed.

Routing programmes for nested-based manufacture, panel optimisation, drilling and grooving, edge-banding allowances and part labels built in SWOOD CAM and Alphacam, posted for the router on your floor.

Get in touch What we route →

SWOOD CAMALPHACAMSOLIDWORKSFUSION 360AUTOCAD

ISSUED TOISOASMEDINBS

ON YOUR TEMPLATES
AND TITLE BLOCKS

FIG.43 · ROUTED PANEL NEST · REV.B

CLICK TO EXPLODE / ASSEMBLE

ROUTED PANEL NESTREV.BFIG.4318MM MDF · Ø12 COMPRESSIONSCALE 1:10SHT 1/4

SVC.04.D · ROUTING INDEX, SEVEN LINES

Panels cut once,
labelled to the bench

NESTED-BASED MANUFACTURE PROGRAMMED FOR YOUR ROUTER, TOOLING AND SHEET STOCK

.01Nested-Based Panel ProgrammingCarcass parts nested across sheet stock with onion-skin or tab holding, sequenced so small components stay put until the final pass.

.02Panel Optimisation & Yield ReportingCutting patterns optimised across board sizes and grain direction, with a yield and offcut report issued for every job.

.03Drilling, Grooving & Hardware RoutinesSystem 32 hole patterns, hinge cups, dowels, shelf pins and groove work driven from the hardware library your workshop already uses.

.04Edge-Banding & Trim AllowancesOversize allowances, trimming passes and banding thickness carried in the programme, so finished panels land on their drawn size.

.05Solid Timber & Shaped Component RoutingCurved rails, mouldings and shaped components programmed with climb and conventional passes set to protect grain and edge quality.

.06Labelling & Part TraceabilityBarcode or text labels generated per part with room, cabinet and orientation, so panels reach the right bench in the right order.

.07Post-Processors & Tool LibrariesPosts configured for Biesse, Homag and SCM routers with your aggregate heads, tool positions and vacuum pod layouts.

PROCESS · FOUR CHECKPOINTS

How a routing programme is proven

STEP.01

Model & machine review

Cabinet models, board list and router capability reviewed together, bed size, pod layout, aggregates and the tooling you hold.

STEP.02

Construction & hardware

Joinery method, hardware and edge treatment confirmed against your workshop standard before any carcass is broken down into parts.

STEP.03

Nest & simulate

Panels nested for yield, holding strategy set, and the programme simulated against pods and clamps to keep the cutter off the bed.

STEP.04

Post & label

Machine files, labels and cut lists issued for your router, with a yield report and support through the first sheet.

SECTORS ·FURNITURE MAKERSJOINERY WORKSHOPSSHOPFITTINGRETAIL FIXTURESKITCHEN MANUFACTURINGARCHITECTURAL MILLWORKEXHIBITION BUILD

Programmes we've nested

ALL WORK →

DROP RENDER · FIG.118

WALNUT RETAIL COUNTER NESTFIG.118

DROP RENDER · FIG.119

KITCHEN CARCASS ROUTING SETFIG.119

DROP RENDER · FIG.120

WARDROBE RUN PANEL PACKFIG.120

DROP RENDER · FIG.121

SHAPED RECEPTION FASCIAFIG.121

DROP RENDER · FIG.122

DISPLAY FIXTURE NEST SERIESFIG.122

DROP RENDER · FIG.123

SLATTED ACOUSTIC PANEL RUNFIG.123

OUR CLIENTS · ON THE RECORD

Signed off, worldwide

REG.014 · SIGN-OFF

“I can attest to ZetaCore's exceptional sheet metal design capabilities. Their designs are detailed, accurate, and perfectly suited to our needs, which has significantly improved our project outcomes.”

MICHAEL ANDERSONCUSTOMER IN UK

ORIGINUNITED KINGDOMSERVICECNC WOOD ROUTINGSTATUSAPPROVED ✓

SHT 1 / 3

RFI LOG · MOST FREQUENT QUESTIONS

Before you ask

Biesse, Homag, SCM and Felder are routine, including aggregate heads and pod-and-rail configurations. Send a known-good file off the machine and the post is matched to it.

Sheets to nest and
a router standing idle?

NDA-FIRST · SCOPED WITHIN 24H · NAMED ENGINEER